Input Current For Signal | 50mA |
Modulation | GFSK (Gaussian Frequency Shift Keying) |
Input Supply Voltage | 3.6~6V |
Maximum Operating Range | 10M |
Operating Frequency | 2.4GHz ISM band |
Country of Origin | Made in India |
The HC-05 Bluetooth Module without Baseplate is a slave only device. This means that it can connect to most phones and computers with Bluetooth but it cannot connect to another slave-only device such as keyboards and other HC-06 modules. To connect with other slave devices a master module would be necessary such as the HC-05 version which can do both master and slave.
1 x HC-05 Bluetooth Module HC05 Wireless Bluetooth Module without Base Plate
Modulation modes | standard FM radio |
Channel | LINE / USB channel (stereo), C channel (mono) |
Supply voltage | DC 3.0V-5.0V |
Output power | 100mW |
Frequency Response | 50Hz-18KHz |
Transmission frequency | 87.0MHz-108.0MHz |
Country of Origin | Made in India |
Employ advanced digital audio signal processing () technology and FM modulation phase-locked loop (PLL) to make sound more realistic, more stable performance, long working time, and no frequency deviation. LCD display provides a more intuitive and accurate view, with low power consumption and malnoise interference.
1 x DSP PLL 87-108MHz Digital Wireless Microphone Stereo FM Transmitter Module Board
Transmit Power | 13dBm |
Receiving Current | 16mA |
Receiver Sensitivity | 120dBm (1.2kb / s in ook) |
Transfer Rate | 300Kbps |
Operating Frequency | 433Mhz |
Modulation | FSK / OOK |
Country of Origin | Made in India |
This is the 434MHz base RFM69HCW Wireless Transceiver that is found on our RFM69 Breakout. The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Medicine) band, a set of frequencies set aside for low-power, short-range, license-free radios. It's perfect for building inexpensive short-range wireless networks of sensors and actuators for home automation, citizen science and more.
This RFM69HCW module operates on the 434MHz frequency and is capable of transmitting at up to 100mW and up to 300kbps, but you can change both of those values to fit your application. For example, you can maximize range by increasing the transmit power and reducing the data rate, or you can reduce both for short-range sensor networks that sip battery power. At full power and with simple wire antennas, we can get messages from one side of a large office building to the other through numerous internal walls. In open air, you can reach 500 meters or more. With more complex antennas and modulation schemes, similar parts have successfully been transmitted from space to the ground (by very smart amateur radio enthusiasts; your mileage may vary)!
The RFM69HCW uses an SPI (Serial Peripheral Interface) to communicate with a host microcontroller, and several good Arduino libraries are available. It supports up to 256 networks of 255 nodes per network, features AES encryption to keep your data private, and transmits data packets up to 66 bytes long.
:Features:1 x 434 MHz RFM69HCW Wireless Receiving Module RFM69HCW Programmable RF Transceiver Module
Material | Abs Plastic |
Dynamic Current | 3 -5mA |
Supply Voltage | 2.7~5.5V |
Packaging Type | Box |
Transmission Distance | up to 8m |
Country of Origin | Made in India |
This is HX1838 VS1838 NEC Infrared IR Wireless Remote Control Sensor Module For Arduino. The sensor uses HX1838, with high sensitivity and an Operating voltage of 5V. Output form Digital output.
IR Remote Control Kit theory test distance of about 5-8 meters, but the practical application depends on the ambient factors you use, as well as the middle barrier (such as diaphragm, glass, obstructions or other material blocking),
This is a new ultra-thin 38K universal infrared IR Remote Control Kit, NEC encoding format 1-21-key remote control, USB port stereo, car MP3, foot bath, lighting, digital photo frame, microcontroller development board, learning board, etc.
Material | ABS |
Shape | Rectangular |
Input Voltage | 5VDC |
Packaging Type Box | Box |
Operating current | 80mA |
Operating voltage | 2.3 ~ 3.6V |
Country of Origin | Made in India |
ESP32 Development Board already has an integrated antenna and RF balun, power amplifier, low noise amplifiers, filters, and power management module. The entire solution occupies the smallest amount of printed circuit board surface. This ESP32 Development Board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology, best power and RF properties that are safe, reliable and scalable for a variety of applications.
wifi frquency | 2.4GHz |
Material | ABS |
Working Frequency | 2400~2483.5MHz |
Antenna | IPEXconnector |
Support Voltage | 2.7V~3.6V |
Model | Ai-WB2-13U |
Country of Origin | Made in India |
This is an Ai-WB2-13U Module developed by Ai-Thinker Team. The module is equipped with a BL602 chip as the core processor and supports Wi-Fi 802.11b/ g/n protocol and BLE 5.0 protocol. The BL602 chip has a low-power 32-bit RISCCPU, 276KB RAM, and a wealth of peripheral interfaces, including SDIO, SPI, UART, I2C, IR Remote, PWM, ADC, DAC, PIR GPIO etc. It can be widely used in the Internet of Things(IoT), mobile devices, wearable electronic devices, smart homes and other fields.
Features:Initial Data Size | 24.0*16.0*3.1(+-0.2)mm |
Working Frequency | 2400 ~ 2483.5MHz |
Model | Ai-WB2-12F |
Flash | Default 4MByte, MAX support 16MByte |
Interfaces | UART/GPIO/ADC/PWM/I2C/SPI |
UART Rate | Default 115200 bps |
Country of Origin | Made in India |
Ai-WB2-12F is a Wi-Fi&BT module developed by the Ai-Thinker Team. The module is equipped with a BL602 chip as the core processor and supports Wi-Fi 802.11b/ g/n protocol and BLE 5.0 protocol. The BL602 chip has a low-power 32-bit RISCCPU, 276KB RAM, and a wealth of peripheral interfaces, including SDIO, SPI, UART, I2C, IRRemote, PWM, ADC, DAC, PIR GPIO etc. It can be widely used in the Internet of Things (IoT), mobile devices, wearable electronic devices, smart homes and other fields.
Features:wifi frquency | 2.4GHz |
Material | ABS |
Advanced Security | WPS/WEP/WPA/WPA2 Personal/WPA2 Enterprise/WPA3 |
Working Frequency | 2400 ~ 2483.5MHz |
Flash | Default 2MByte Support Expansion |
UART Rate | Default 115200 bps |
Interface | UART/GPIO/ADC/PWM |
Country of Origin | Made in India |
Ai-WB2-01S is a Wi-Fi & BLE module developed by Ai-Thinker Team. This module is equipped with a BL602 chip as the core processor and supports Wi-Fi 802.11b/g/n protocol and BLE 5.0 protocol. The BL602 chip has a built-in 32-bit RISCCPU with low power consumption and 276KB RAM. It can be widely used in the Internet of Things(IoT), mobile devices, wearable electronic devices, smart homes and other fields.
Features:Data Rate | 20 Mbps |
Mounting Type | Surface Mount |
Material | ABS |
Frequency | 5GHz |
Wireless Standard | Wi-Fi |
Model Number | RS5704 |
Packaging Type | Box |
Country of Origin | Made in India |
Data Rate | 20 Mbps |
Mounting Type | Surface Mount |
Usage/Application | Equipment |
Material | ABS |
Frequency | 2.4GHz |
Wireless Standard | Wi-Fi |
Packaging Type | Box |
Country of Origin | Made in India |
ESP8266 Serial WIFI Module (ESP-07) is a cheap and easy way to connect any small microcontroller platform, like Arduino, wirelessly to the Internet. ESP8266 has powerful onboard processing and storage capabilities that allow it to be integrated with the sensors and other application-specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including the front-end module, is designed to occupy minimal PCB area.
ESP8266 Serial WIFI Module (ESP-07) is addressable over SPI and UART, making this an exceptionally easy choice for anyone wanting to build an Internet of Things thing. You can use AT commands to connect to WiFi networks and open TCP connections without the need to have TCP/IP stack running in your own microcontroller: You can simply connect any microcontroller to this module and start pushing data up to the Internet.
Protocol Support | LWIP, Freertos |
Packaging Type | Box |
Power Consumption (Watt) | Low |
Data Rate | 24MBPS |
WIFI | 2.4GHz Dual-Mode |
Support Three Modes | AP, STA, and AP+STA |
Country of Origin | Made in India |
The ESP32 is integrated with Antenna switches, RF Balun, power amplifiers, low-noise amplifiers, filters, and management modules, and the entire solution occupies the least area of PCB. 2.4 GHz Wi-Fi plus Bluetooth dual-mode chip, with TSMC Ultra-low power consumption 40nm technology, power dissipation performance, and RF performance is the best, safe reliable, and easy to extend to a variety of applications.
Specifications:Data Rate | 54 Mbps |
Clock Frequency | 80~240 MHz |
Operating Voltage | 2.3~3.6V |
Operating Current | 80mA |
Processor | Single or Dual core Tensilica Xtensa 32-bit LX6 |
Flash Memory | 4 MB |
Country of Origin | Made in India |
This is ESP WROOM 32 MCU Module. ESP WROOM 32 is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding. At the core of this module is the ESP32S chip, which is designed to be scalable and adaptive. There are 2 CPU cores that can be individually controlled or powered, and the clock frequency is adjustable from 80 MHz to 240 MHz. The user may also power off the CPU and make use of the low-power coprocessor to constantly monitor the peripherals for changes or crossing of thresholds. ESP32S integrates a rich set of peripherals, ranging from capacitive touch sensors, Hall sensors, low-noise sense amplifiers, SD card interface, Ethernet, high-speed SDIO/SPI, UART, and I²C. Using Bluetooth, users can connect to their phone or broadcast low energy beacons for its detection. The use of Wi-Fi enables a large physical range, as well as a direct connection to the internet via a Wi-Fi router. Perfect for wearable electronic or battery-powered applications, the ESP32 chip uses less than 5µA.
Specification:(Click to Download)
https://drive.google.com/open?id=1zNsPTMhopc7N4ns2KYR4L9hCuyQ6Bp-B
Installation Guide:https://drive.google.com/open?id=1Lc1d-4CxAHgpmDGu2qI11wqS-BJmwlY-
Package Included:1 x IOT ESP32 Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores ESP32s Antenna Module Board for Arduino IDE
Material | Plastic |
Is It Portable | Portable |
Packaging Type | Box |
Supplies | Assembled class |
RC Parts & Accs | Transmitters |
Remote Control Peripherals/Devices | Remote Controller |
Model Number | RS970 |
Country of Origin | Made in India |
This is a robot dedicated wireless remote control/ supporting 32 32-channel servo controller/PS2 handle. This PS2 wireless controller receives suits for robots robot arms etc. Used to form a complete set of the servo control board of my shop, other PS2 wireless controller, we don't guarantee can be compatible. This handles receiver wire has been completed,3 lines with 3 pins.
1 x Robot Dedicated Wireless Remote Control/ Supporting 32 Channel Servo Controller/PS2 Handle/ Remote
wifi frquency | 5GHz |
Board Type | Single layered |
Color | White |
Model Number | ESP8266 |
Shape | Square |
Packaging Type | Box |
Country of Origin | Made in India |
These SMD ESP8266 modules have an unfriendly pin pitch. But by use of this adapter PCB, you can solder ESP-07, ESP-08 or ESP-12E modules and can use your favourite ESP8266 SMD modules on breadboards or perforated boards.
ESP8266 adapter plate compatible with the ESP07, ESP08, and ESP12. Because soldering the ESP modules is not always easy, this adapter plate is available. The WiFi module can be soldered to the PCB, wherein they are connected to connection points indicated by headers.
On the bottom layer, there is a land pattern for a 3.3V regulator. To use a 3.3V regulator you will need to desolder 0 Ohm jumper resistor R2.(middle resistor) The VCC pin then becomes 4.5V to the 9V power input.
Features:1 x ESP8266 Adapter Plate Serial Wireless Wi-Fi Module for ESP-07, ESP-12F, ESP-12E Compatible with Arduino
Shape | Rectangular |
Color | Black |
Operating Voltage | 5V |
Packaging Type | Box |
Control Distance | 8m / 314.96 inch |
Material | FR4 |
Country of Origin | Made in India |
This 5V 1 Channel IR Relay Module with Remote Control is a one-channel latching relay module. The output of the module is passive and it can be controlled by its 2-button IR wireless controller when the module is powered on. The output of the module is passive and it can be controlled by its 2-button IR wireless controller when the module is powered on. The 5V 1 Channel IR Relay Module comes equipped with a suitable remote control. It also can drive most household electrical appliances.
Specifications:1 x 5V 1 Channel IR Relay WG0151 1 Channel Infrared Switch Relay Module Driver Board 5V Active Remote Controller
Connectivity | Wireless |
Transaction Storage | up to 1000 users |
Type Of System | Fingerprint Access Control |
Color | Black |
Installation Type | Wall Mounted |
Body Material | ABS |
Packaging Type | Box |
Opening mode | password or key fob |
Key fob reading distance | 1 - 15 cm |
Country of Origin | Made in India |
Port Count | 1 Port |
Baud Rate | 9600 bps |
Compatibility | Windows |
Connector Type | USB A |
USB Interface | Mini-B (2.54mm pitch pin header) |
IC Chip | FT232RL |
Communication Protocol | UART, Bit Bang I/O, SPI |
Country of Origin | Made in India |
XBee Adapter is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated FT232RL IC, It can be used for programming or communicating with a board which is basic For ARDUINO but without a USB interface, like Sniffer Nano. On the other hand, you may connect your PC to various wireless applications via the BEE-compatible modules.
Because XBee modules have 2 mm pin spacing, we recommend one of the adapter boards for each module. The XBee adapter boards provide several advantages to the XBee modules as breadboard-friendly standard 0.1-inch pin spacing, mounting holes, and easy-to-solder connections. Even if you are communicating point-to-point without a PC, we still recommend that you always have at least one XBee USB Adapter Board, so you can easily configure and test each XBee module before putting it in a point-to-point application.
Network protocol | TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/DNS |
Operating system | Windows/Linux |
Power supply | 5V |
Dial-up protocol | NDIS/RNDIS/PPP |
Communication interface | USB / UART |
card support | Nano SIM card (1.8V / 3V) |
Country of Origin | Made in India |
SIM7600G-H 4G DONGLE is an industrial-grade 4G dongle, which features up to 150Mbps downlink rate and 50Mbps uplink rate, and supports operating systems including Windows/Linux/Android. By simply connecting it to a laptop, PC, Raspberry Pi, drone, industrial computer, or other IoT host device, SIM7600G-H 4G DONGLE is easy to use a 4G network connection on the go.
Features1 x Waveshare SIM7600G-H 4G DONGLE, GNSS Positioning, Global Band Support
Item Name | Nano 20A ESC |
Current | 20A |
Burst Current(10s) | 25A |
Power Supply | 3-4S Lipo Battery |
Programmable | Yes |
Brand Name | Emax |