New Items

• SATA supports up to 6GB SATA3 mode.
• It is so small and lightweight that you can carry it easily.
• Low profile design is easy to use.

Description :

Convert the SAS hard disk to SATA and connect directly to the mainboard SATA port with this SATA7+15PINMale to Female to SATA 22P adapter. Using this adapter your ordinary motherboards can also directly enjoy high-speed SAS hard drives.

Features :

• SATA supports up to 6GB SATA3 mode.
• It is so small and lightweight that you can carry it easily.
• Low profile design is easy to use.

Package Included :

1 x SATA (7+15PIN) Male to Female to SATA 22P Adapter

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.

The YRRC 30A ESC is mainly used for RC Drone FPV Racing. BLHeli is an ESC firmware, and BLHeli_S is the 2nd generation after BLHeli. An electronic speed controller ESC is an electronic circuit that controls and regulates the speed of an electric motor. YRRC 30A ESC may also provide reversing of the motor and dynamic braking.  The board with 12 ESR capacitors can effectively reduce the interference to the picture transmission equipment and improve the stability of the system.

If you're serious about your quadcopter's performance, look no further than the A2212. Built with high-end magnets, a high pole count and a custom motor mount, this 1400KV BLDC Motor is designed purely for multi-rotor applications. The 1400KV BLDC Motor includes an integrated prop adaptor for use with many different style props featuring a 4mm shaft and adaptor sleeves for 5 mm/6 mm props. 1400KV BLDC Motor also has an in-built aluminium mount for quick and easy installation on your quadcopter frame. This is not a modified aeroplane out of a runner. 1400KV BLDC Motor was designed from the ground up specifically for multi-rotor applications.

If you're serious about your quadcopter's performance, look no further than the A2212. Built with high-end magnets, a high pole count and a custom motor mount, this 2200KV BLDC Motor is designed purely for multi-rotor applications. The 2200KV BLDC Motor includes an integrated prop adaptor for use with many different style props featuring a 4mm shaft and adaptor sleeves for 5 mm/6 mm props. 2200KV BLDC Motor also has an in-built aluminium mount for quick and easy installation on your quadcopter frame. This is not a modified aeroplane out of a runner. 2200KV BLDC Motor was designed from the ground up specifically for multi-rotor applications.

• Delivery Time: 5 to 7 days

The mercury tilt switch module uses a small mercury ball that completes the circuit when you tilt the module. It consists of a mercury switch, a 680Ω resistor and an LED that will light up when tilt is detected. The mercury ball will open/close the circuit when the module is rotated.

This is an easy-to-use digital Soil Moisture Sensor. Just insert the sensor into the soil and it can measure moisture or water level content in it. Soil Moisture Sensor gives a digital output of 5V when the moisture level is high and 0V when the moisture level is low in the soil. The Soil Moisture Sensor includes a potentiometer to set the desired moisture threshold.

A UBEC (universal battery eliminator circuit) is purely a device that converts high-voltage (such as 25V from a 6S LiPo) to lower voltages to allow the full UAS to be powered from one primary battery source, The 5V/6V 3A Switch-Mode UBEC is a Switch-mode DC regulator separated from ESC (ESC) Electronic Speed Controller for brushless/brushed motor), it will take high-voltage (5.5V to 26V) power from your battery pack and convert it to a consistent safe voltage for your receiver, gyro and servo.

BLHeli-S is the latest protocol for high-performance ESC. BLHeli_S 30A ESC offers high-frequency response and fast motor control for drone racing and competition. Can also be easily programmed to output different protocols- Muted mode, Oneshot125, Oneshot42 Multshot and DSHOT. In addition to offering enhanced capabilities such as reversing and often, telemetry, BLHeli_S 30A ESC can have their parameters and features programmed through the flight controller while it is connected to a PC (if the autopilot firmware provides this capability also).

Bluesky 5V 3A UBEC voltage converter to create 5V output voltage from 2-6S battery pack input voltage. The UBEC is ideal for providing FPV cameras and GoPro brushless gimbals with a constant 5V voltage.

MPU6050 3x Axis accelerometer sensor and 3x Axis gyroscope sensor and HMC5883L Triple Axis Magnetometer and BMP180 Barometric Pressure Sensor. It has build in ultra low noise linear LDO voltage regulator. And built-in onboard filters, which reduce noise from the motor and other high current electronics. You can easily select two I2C address for MPU6050 by soldered jumper.

The Sharp GP2Y0A21 IR Infrared Distance Sensor is an analogue proximity sensor with a range of 10-80cm.  The GP2Y0A21 is a distance-measuring sensor unit composed of a position-sensitive detector (PSD), an infrared emitting diode (IRED), and a signal processing circuit. This device outputs the voltage corresponding to the detection distance. So this sensor can also be used as a proximity sensor. It provides accurate distance measurement (up to 80cm). Factors such as the reflectivity of the object, the environmental temperature, and the operating duration are not affected easily by distance detection because the sensor triangulates the emitted signal. This sensor package makes it easy to connect to your microcontroller board or single-board computer! The 3 pins correspond to power (VCC, GND), and an analogue voltage signal proportional to the distance to an object (if present).

The ISD1820 Audio Module is a really easy way to add Voice Recording (and Playback) to your project. The Module can be operated directly by using the 3 Push-Buttons or with every microcontroller (ex. Arduino). A microphone is implemented directly on the board, and you can connect any 8 Ohm Speaker. Your recordings are saved even without power due to the non-volatile storage on the ISD1820.

This handy magnetic hall sensor has an A3141 chipset, a 3144 linear Hall-Effect sensor, an LM393 dual differential comparator, a potentiometer, two LEDs and six resistors. It is fully compatible with Raspberry Pi, ESP8266 and other popular microcontrollers.

This is the XF-25 Breadboard. Its advantages are not inferior to previous conventional breadboards. Ultra Mini Breadboard can save more materials than the previous breadboard and is environmentally protected with its small figure. You can assemble the Breadboard independently according to the needs of the circuit plate size in the experiment. The using principle is the same as a previous old breadboard. The Block Building Breadboard measures 1.5x2cm. It uses the Base Plate For the block Building Breadboard.

This is the XF-25 Breadboard. Its advantages are not inferior to previous conventional breadboards. Ultra Mini Breadboard can save more materials than the previous breadboard and is environmentally protected with its small figure. You can assemble the Breadboard independently according to the needs of the circuit plate size in the experiment. The using principle is the same as a previous old breadboard. The Block Building Breadboard measures 1.5x2cm. It uses the Base Plate For the block Building Breadboard.

RH-821 08 Mini Quadcopter emits bright lights throughout the entire propeller frame, instantly illuminating the sky with powerful light effects. Whether day or night, the colour of the lights helps to easily identify the direction of flight.

RH-821 08 Mini Quadcopter gets started in minutes. Smart altitude hold allows the kid's drone to stay hovering at a certain height. Under headless mode, the forward direction will always be the direction you faced when you paired the drone.

RH-821 08 Mini Quadcopter Drone performs impressive 360-degree roll and rotation stunts. All the kids will be impressed with it!

• Item Code: RS6116
• Production Capacity: 150

H66 Mini Drone has an intelligent altitude hold function that can accurately lock the flight altitude to keep the drone in a stable hover and effectively avoid aerial camera shaking. After setting the target via the APP, you can control the drone with your finger tracking the flight. Then the H66 Mini Drone will automatically fly following the set track. The H66 Mini Drone will automatically recognize and respond intelligently to photos, and video support.

• Item Code: RS6110

This 20A Brushed Electronic Speed Controller is a small-sized ESC that can supply a current of up to 20A by using a 2S lipo battery as an input. The ESC accepts a standard RC signal as input and offers functions as forward, reverse, and breaking. This ESC has high-quality silicone cables for the battery input and the motor output.

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.

This EMAX MT2213 935KV Brushless DC Motor equips high-quality bearings to ensure efficient and vibration-free operation. Silicone steel for high-performance operation with low temperature. This MT2213 935KV Brushless DC Motor is specially meant for your Quadcopters or other types of Drones like Tri, Hexa, etc. The combination of a 3S LiPO(Lithium Polymer) battery with this MT2213 935KV Brushless DC Motor for a drone with a 1045 propeller as suggested will give you excellent flight characteristics. With qualities of durability in use and high efficiency in performance, it is the perfect fit for your RC Model requirement.

GP2Y1010AU0F is an optical air quality sensor, designed to sense dust particles. An infrared emitting diode and a phototransistor are diagonally arranged into this device, to allow it to detect the reflected light of dust in air. It is especially effective in detecting very fine particles like cigarette smoke and is commonly used in air purifier systems.

The sensor has a very low current consumption (20mA max, 11mA typical), and can be powered with up to 7VDC. The output of the sensor is an analogue voltage proportional to the measured dust density, with a sensitivity of 0.5V/0.1mg/m3.

This GY-521 Gyroscope Module has an onboard LDO chip and supports 5 V / 3.3 V voltage input. Further, the GY-521 Gyroscope Module unit also supports IIC standard communication protocol, with 16 16-bit AD converters and 16-bit data output. Some of its other specifications include a PCB size of 22.1 (mm) x13.6 (mm), provision for users to control the program of accelerator full grid sensor in the range of 2g 4g 8g and 16 g and angular velocity full case sensing range for 250 500 1000 and 2000 / SEC (DPS) among others.

DSM501A PM2.5 Dust Sensor Module can sense tobacco smoke and pollen, house dust, such as a heating automatic suction device, adjustable resistance is set up to detect the size of the dust. Using the same particle counter principle as the foundation, to detect the absolute number of particles per unit volume.

ESP8266 Serial WIFI Module (ESP-07) is a cheap and easy way to connect any small microcontroller platform, like Arduino, wirelessly to the Internet. ESP8266 has powerful onboard processing and storage capabilities that allow it to be integrated with the sensors and other application-specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including the front-end module, is designed to occupy minimal PCB area.

The ESP32 Wroom Programming Jig is a specialized testing device for ESP32-WROVER modules. It ensures efficient and reliable testing of ESP32-WROVER modules during the manufacturing process. This ESP32 Wroom Programming board is designed to streamline the burning and testing procedures, ensuring the quality and functionality of ESP32-WROVER modules before they are deployed in electronic devices or IoT applications.

The ESP32 is integrated with Antenna switches, RF Balun, power amplifiers, low-noise amplifiers, filters, and management modules, and the entire solution occupies the least area of PCB. 2.4 GHz Wi-Fi plus Bluetooth dual-mode chip, with TSMC Ultra-low power consumption 40nm technology, power dissipation performance, and RF performance is the best, safe reliable, and easy to extend to a variety of applications.

This 1500TVL CMOS Camera can be used as both PAL and NTSC. The toggle switch is provided on the camera by which you can enjoy the operation of PAL or NTSC mode. This camera is very compact and easy to use.

This camera is tailored for FPV, dedicated to FPV HD aerial camera. It creates the delicate clear image, micro ultralight design, high definition color

• Item Code: RS3148
• Production Capacity: 150
• Delivery Time: 1-3 DAYS
• Packaging Details: 1/3 inch CMOS 1500TVL Mini FPV Camera 2.1mm Lens PAL / NTSC With OSD

The Radiolink M10N GPS SE100 Module is a popular GPS module made by RadioLink. The module comes plug-and-play with a cable to connect with the Pixhawk & APM flight controllers. It can also be used with most open-source flight controllers, such as the PX4 and iNav FCs.

The Radiolink AT9S Pro Remote is an advanced and feature-rich remote control system designed for professional radio-controlled model enthusiasts. It is a powerful and reliable tool that enhances your control over your RC models, providing precise and responsive operation.

SBUS, PPM, PWM and CRSF Signals Support:

With the DSSS&FHSS protocol, SBUS, PPM, and PWM can operate simultaneously for seamless user control. With the CRSF protocol, TBS Crossfire needs to bind to the BLACKSHEEP receiver. Standard receiver R9DS packed is the receiver with SBUS and PWM signal output. AT9S Pro is also compatible with R6DSM, R6DS, R12DSM, and R12DS receivers of RadioLink. Compatible receivers cover a wide range of aircraft to meet the most demanding applications of customers.

CRSF Protocol Supported:

Using proprietary communication technology of RadioLink, DSSS and FHSS hybrid spread spectrum, as a foundation, we have added the CRSF* protocol from the TBS. AT9S Pro is compatible with TBS Crossfire.

DSSS and FHSS Hybrid Spread Spectrum:

DSSS and FHSS hybrid spread spectrum, 16 channels pseudo-random frequency hopping, and QPSK modulation ensure excellent anti-interference performance, highly constant, and stable transmission signal present on all 12 channels of AT9S Pro. The actual control distance of AT9S Pro is 3400 meters air. These features allow the AT9S to produce a highly constant and stable transmission signal present on all 12 channels.

Whether you are an experienced RC hobbyist or a professional pilot, the Radiolink AT9S Pro Remote offers exceptional control, reliability, and versatility. Its advanced features and user-friendly interface make it an ideal choice for enthusiasts who demand the best performance from their RC models. Experience the next level of remote control with the AT9S Pro.

• Item Code: AT9S
• Production Capacity: 150
• Delivery Time: 1-33 DAYS
• Packaging Details: Radiolink AT9S Pro 2.4GHz 12CH RC Drone Remote with R9DS Receiver, AT9S Pro Flight Controller

This is RC USB flight simulator. This RC USB Flight Simulator supports G7, Phoenix RC5.0, Reflex XTR, VRC. This RC USB Flight Simulator is suitable for RC helicopters, quadcopters, aeroplanes. This universal RC USB Flight Simulator adapter dongle allows you to connect a variety of different RC transmitters to your PC or Mac for use in Flight Simulators such as FPV Freerider, Aerofly RC, Phoenix RC, Liftoff, Hot Props, RealFlight, DRL, and more.

This is an Assembled DIY Geiger Counter Kit Module Miller Tube GM Tube Nuclear Radiation Detector Geekcreit for Arduino - products that work with official Arduino boards. It supports most of the Geiger tube: M4011, STS-5, SBM20, J305, etc. (the 330~600V operating voltage of the Geiger tube can be supported). Also, it supports computer (PC) data acquisition, Matlab analysis and processing. This is a good kit for MCU software developers who just want to drive Geiger Tube for their software.

This popular and interesting DIY Solar Car STEM Kit can meet your different needs, and let you make science and STEM projects much more fun and more choices to fit your experiments. Three power generation modes, energy conversion, circuit learning, and understanding of the conversion between sound, light and electricity. An excellent Family & Kids program, great for Primary and secondary school projects.

This DIY Solar Car STEM Kit is good for kids to experiment and explore basic electrical circuits. DIY Solar Car STEM Kit can also be used in school in science, STEM, technology and design courses, easy to meet your project needs, and properly educating some circuit knowledge would be a good interaction time with your kids together.

This 5010 360KV High Torque Brushless Motor for Drones comes with self-cooling technology, so it will be able to withstand high temperatures up to 140° C (356 F). The motor can produce thrust up to 1500 gm on a 4s Lipo battery.

Tarot TL2955 4008MT Brushless Motor is an electric motor that works with RC cars. The motor is compatible with similar products, like the TarotTarot 4020 TL2375 280KV brushless motor. This TL2955 4008MT Brushless Motor also replaces the TarotTarot 5008 TL2955 330KV brushless motor, which means you can replace your old motor with this new one.

A2212 is a brushless outrunner DC motor specifically made to power Quadcopters and Multirotors. It is a 2450KV Brushless Motor. It provides high performance, super power and brilliant efficiency. These motors are perfect for medium-sized quadcopters with 8-inch to 10-inch propellers. Use 2450KV Brushless Motor to build powerful and efficient quadcopters. Perfect with our F450 quadcopter frame. Our 30A ESCs can be used to drive the motor.

The engineers at EMAX are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors that further improving on performance and durability while retaining the same affordability.

This EMAX MT2213 935KV Brushless DC Motor equips high-quality bearings to ensure efficient and vibration-free operation. Silicone steel for high-performance operation with low temperature. This MT2213 935KV Brushless DC Motor is specially meant for your Quadcopters or other types of Drones like Tri, Hexa, etc. The combination of a 3S LiPO(Lithium Polymer) battery with this MT2213 935KV Brushless DC Motor for a drone with a 1045 propeller as suggested will give you excellent flight characteristics. With qualities of durability in use and high efficiency in performance, it is the perfect fit for your RC Model requirement.