Raspberry Pi Accessories

This is an Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. Compared to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently. Are you still worried about the heat dissipation function? Do you want to have a new heat sink? The new Raspberry Pi 4B aluminium heat sink could help you solve this trouble.

These pure aluminium heat sinks include thermal tape that transfers heat efficiently to the heat sink, providing additional cooling for the IC. The contours of these heat sinks are perfectly adapted to the Raspberry Pi 4B standard. A heat sink is designed to maximize its surface area in contact with the cooling medium surrounding it, such as the air. A heat sink transfers thermal energy from a higher-temperature device to a lower-temperature fluid medium.

The fluid medium is frequently air, but can also be water, refrigerants or oil. If the fluid medium is water, the heat sink is frequently called a cold plate. When the airflow through the heat sink decreases, this results in an increase in the average air temperature. This in turn increases the heat sink base temperature. Additionally, the thermal resistance of the heat sink will also increase. The net result is a higher heat sink base temperature.

Specifications:

• Material: Aluminum
• Colour: Black
• Compatibility: Raspberry Pi 4 Model B

Features:

• High quality, made of aluminium alloy, it will not rust.
• The contours of these heat sinks are perfectly adapted to the Raspberry Pi 4B standard.
• Thermal conductive adhesive tape backing
• Can be applied with other devices such as BeagleBone, VRAM VGA RAM, IC Chips, MOSFET SCR, Southbridge, Northbridge etc
• Reduce chip hot spots and increase thermal dissipation surface area

Installation Method:

This heatsink has an adhesive film on the back. It is very easy to mount it on the BGA chip. Just remove the protective film on the back of the heatsink and press it gently to the BGA chip. The heatsink will stick to the BGA chip and cool it.

Package Included:

1 x 4 In 1 Aluminum Heatsink For Raspberry Pi 4 Model B - Black

This is a heavy-duty Raspberry Pi 5 aluminium passive cooling case which is specially designed for the Raspberry Pi 5 in all variants (2GB/4GB/8GB), it compatibles with the latest Raspberry Pi 5 computer. This sleek enclosure is designed with a prominent heat sink block on the top, ensuring exceptional cooling for your Raspberry Pi 5. Crafted from high-quality aluminium alloy, the case not only provides robust protection but also enhances the overall aesthetic of your Raspberry Pi setup.

Specifications:

• Colour: Black
• Material: Aluminum

Features:Sleek and Functional Design:The case features a sleek and functional design that not only complements the Raspberry Pi 5's form factor but also provides easy access to ports and connectors, ensuring a seamless user experience.Efficient Heat Dissipation:Experience superior thermal management with the integrated raised heat sink block on the top of the case. This design promotes efficient heat dissipation, keeping your Raspberry Pi 5 at an optimal operating temperature even during demanding tasks.Premium Aluminum Alloy Construction:The case is meticulously crafted from high-grade aluminium alloy, offering durability and a modern, sophisticated look for your Raspberry Pi 5.Enhanced Protection:Safeguard your Raspberry Pi 5 against dust, scratches, and minor impacts with this sturdy aluminium alloy case. The robust construction ensures long-lasting protection for your valuable computing device.Easy Installation:

Designed for user convenience, the case allows for quick and hassle-free installation of the Raspberry Pi 5. The precise cutouts provide easy access to all ports, buttons, and features.

Package Included:

1 x Raspberry Pi 5 Case Metal Case Aluminum Alloy Passive Cooling Enlosure Shell Built in Cooling Column

This is a Raspberry Pi 4 Power Supply 5V 3A Type-C Power Adapter Charger for Raspberry Pi 4 Model B. It has a small and simple shape, a standard plug connector, just plug and play. Raspberry Pi 4 Power Supply has efficient conversion performance and a stable charging process. It is made of great materials, which are non-toxic, environmentally friendly and safe. This Raspberry Pi 4 Power Supply adapter is perfect for use with Raspberry Pi 4. It has been tested on multiple Raspberry Pi under different loads and conditions, where this quality feeder always provides a stable voltage.

Specification:

• Shell Material: Plastic
• Colour: Black
• Input: 100~240V AC
• Output: 5V 3A
• Plug: EU
• Interface: Type-C

Features:

• Small and simple in shape.
• Standard plug connector.
• Efficient conversion performance, stable charging process.
• It has metal plugs for charging easily.
• Insulated wire is not easy to break, which prevents leakage and discharge.

Package Included:

1 x Raspberry Pi 4 Power Supply 5V 3A USB Type-C Power Adapter Power Charger For Raspberry Pi 4 Model B

This is an Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. Compared to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently. Are you still worried about the heat dissipation function? Do you want to have a new heat sink?

The new Raspberry Pi 4B aluminium heat sink could help you solve this trouble. These pure aluminium heat sinks include thermal tape that transfers heat efficiently to the heat sink, providing additional cooling for the IC. The contours of these heat sinks are perfectly adapted to the Raspberry Pi 4B standard.

A heat sink is designed to maximize its surface area in contact with the cooling medium surrounding it, such as the air. A heat sink transfers thermal energy from a higher-temperature device to a lower-temperature fluid medium. The fluid medium is frequently air, but can also be water, refrigerants or oil.

If the fluid medium is water, the heat sink is frequently called a cold plate. When the airflow through the heat sink decreases, this results in an increase in the average air temperature. This in turn increases the heat sink base temperature. Additionally, the thermal resistance of the heat sink will also increase. The net result is a higher heat sink base temperature.

This is an Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. Compared to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently. Are you still worried about the heat dissipation function? Do you want to have a new heat sink?

The new Raspberry Pi 4B aluminium heat sink could help you solve this trouble. These pure aluminium heat sinks include thermal tape that transfers heat efficiently to the heat sink, providing additional cooling for the IC. The contours of these heat sinks are perfectly adapted to the Raspberry Pi 4B standard.

A heat sink is designed to maximize its surface area in contact with the cooling medium surrounding it, such as the air. A heat sink transfers thermal energy from a higher-temperature device to a lower-temperature fluid medium. The fluid medium is frequently air, but can also be water, refrigerants or oil.

If the fluid medium is water, the heat sink is frequently called a cold plate. When the airflow through the heat sink decreases, this results in an increase in the average air temperature. This in turn increases the heat sink base temperature. Additionally, the thermal resistance of the heat sink will also increase. The net result is a higher heat sink base temperature.

As everyone at some point will recognize the Raspberry Pi doesn't include any kind of shutdown button. So the only way to power it off is by unplugging it from the power supply. To make sure you get no corruption of your data files on the SD card you should shut down the Raspberry before powering it off.

So the whole procedure can be a bit annoying especially if you want to use the Raspberry as some kind of embedded PC. e.g. a media server or an internet radio.

Features:

• Sending a shutdown signal to the Raspberry if the Shutdown Button is pressed
• Powering off the Raspberry after save shutdown
• Powering on the Raspberry after the Button is pressed again
• LED light indicating the current state: On / Shutdown / Off
• Easy to setup
• Dimension: 65mm x 30 mm x 20mm

This Li-ion Battery HAT integrates a SW6106 power bank management chip, to provide a 5V regulated power supply to your Raspberry Pi from a 14500(size) Li-ion rechargeable battery, making the Raspberry Pi a fully portable device. The HAT comes with a built-in charger as well to charge the Li-ion battery and supports a bi-directional quick charge. This module can be used as a universal mini power bank and also works with other 5V devices. Powering up Raspberry Pi will depend on battery capacity and load current. From the spec, this HAT can power Raspberry Pi 3 Model B+ for around 30 minutes (800mA), or Raspberry Pi Zero for 2 hours.

Specifications:

• Output voltage: 5V
• Applicable battery: 3.7V 14500 lithium battery
• Dimension: 65mm × 30mm
• Mounting hole size: 3.0mm

Features:

• Rechargeable Battery HAT designed for Raspberry Pi
• Onboard SW6106 chip supports bi-directional quick charge, supports multi quick charge protocols like PD/QC/FCP/PE/SFCP
• Lithium battery protection circuitry
• Onboard LED indicators for Quick charge, Warning, and Power capacity

Compatible With:

• Raspberry Pi Zero
• Raspberry Pi Zero W
• Raspberry Pi Zero WH
• Raspberry Pi 3 Model A+
• Raspberry Pi 3 Model B
• Raspberry Pi 3 Model B+

Note: Battery and Raspberry Pi and battery are not included in the package.

Package Included:

1 x Waveshare Li-ion Battery HAT For Raspberry Pi, 5V Output, Quick Charge

This is an Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. Compared to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently. Are you still worried about the heat dissipation function? Do you want to have a new heat sink? The new Raspberry Pi 4B aluminium heat sink could help you solve this trouble.

These pure aluminium heat sinks include thermal tape that transfers heat efficiently to the heat sink, providing additional cooling for the IC. The contours of these heat sinks are perfectly adapted to the Raspberry Pi 4B standard. A heat sink is designed to maximize its surface area in contact with the cooling medium surrounding it, such as the air. A heat sink transfers thermal energy from a higher-temperature device to a lower-temperature fluid medium.

The fluid medium is frequently air, but can also be water, refrigerants or oil. If the fluid medium is water, the heat sink is frequently called a cold plate. When the airflow through the heat sink decreases, this results in an increase in the average air temperature. This in turn increases the heat sink base temperature. Additionally, the thermal resistance of the heat sink will also increase. The net result is a higher heat sink base temperature.

Specifications:

• Material: Aluminum
• Colour: Blue
• Compatibility: Raspberry Pi 4 Model B

Features:

• High quality, made of aluminium alloy, it will not rust.
• The contours of these heat sinks are perfectly adapted to the Raspberry Pi 4B standard.
• Thermal conductive adhesive tape backing
• Can be applied with other devices such as BeagleBone, VRAM VGA RAM, IC Chips, MOSFET SCR, Southbridge, Northbridge etc
• Reduce chip hot spots and increase thermal dissipation surface area

Installation Method:

This heatsink has an adhesive film on the back. It is very easy to mount it on the BGA chip. Just remove the protective film on the back of the heatsink and press it gently to the BGA chip. The heatsink will stick to the BGA chip and cool it.

Package Included:

1 x 4 In 1 Aluminum Heatsink For Raspberry Pi 4 Model B - Blue

This is an extension cable that can solve the distance limitation between your Raspberry Pi and Raspberry Pi camera you need to open your Raspberry Pi connector carefully and slip the cable in during installation. The flexible flat cable is a new type of data cable which is pressed by a high-tech automatic equipment production line. It has the advantages of soft, random bending and folding, thin thickness, easy disassembly and easy-to-solve electromagnetic shielding.

Specifications:

• Flexible flat cable
• Length: 1 meter
• Material: plastic and metal
• Pin: 15 pin

Features:

• This ribbon flat cable is specially designed for stock long flex cable from a Raspberry Pi Camera for 1 meter.
• The cable usually consists of a flat and flexible plastic film base, with multiple metallic conductors bonded to one surface.
• This cable is perfectly compatible with Raspberry Pi 3, 3 models b, 2, 2b and B+.

Application:

This FFC cable is perfectly compatible with the Raspberry Pi Camera Board. Also applicable for LCD, LCD TV, car navigation, car audio, laptops, PCs, DVD players, recorders, printers, copy machines, etc.

Package Included:1 x 1 Meter Ribbon FFC Camera Cable Flex Cable Ribbon FFC Cable for Raspberry Pi Camera

Product available as per the customer requirement,
Our product is highly appreciated by customers