LilyPad

• Programmable with onboard USB port and the free Arduino IDE
• Great for wearables, textile projects - combine with any LilyPad sensor, power supply, and LEDs
• Only 25mm in diameter!
• 8K Byte of In-System Programmable Program Memory Flash,
• 512 Bytes In-System Programmable EEPROM /512 Bytes SRAM

Description :

The Lily ATtiny85 is a super tiny (25mm) wearable board designed to add functionality to your project without taking up a lot of room. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s actually pretty smart! With an onboard USB port, no interface card is necessary to program it - simply download the ATtiny85 drivers and program it through the Arduino IDE. The Lily ATtiny features 2 PWM ports. 5 GPIO ports. The ports can be connected via soldering or with conductive thread.

Features :

• Programmable with onboard USB port and the free Arduino IDE
• Great for wearables, textile projects - combine with any LilyPad sensor, power supply, and LEDs
• Only 25mm in diameter!
• 8K Byte of In-System Programmable Program Memory Flash,
• 512 Bytes In-System Programmable EEPROM /512 Bytes SRAM

• This is LilyPad Arduino - the main board consisting of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible.
• Board will run from 2V to 5V.
• The latest version of the LilyPad supports automatic reset for even easier programming.
• The back side of the LilyPad is now completely flat!
• We now use a surface mount programming connector to keep the header from poking through.
• This version of the LilyPad now uses the new ATmega328 at 8MHz.
• Arduino 0016 supports the Arduino Pro Mini 328/8MHz/16MHZ.

Description:

The LilyPad Arduino 328 Main Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find in other Arduino boards, in a lightweight, round package designed to minimize snagging and profile, with wide tabs that can be sewn down and connected with conductive thread.

The LilyPad Arduino consists of an ATmega328 with the Arduino boot loader and a minimum number of external components to keep it as small (and as simple) as possible. This board will run from 2 V to 5 V and offers large pin-out holes that make it easy to sew and connect. Each of these pins, with the exception of (+) and (-), can control an attached input or output device (like a light, motor, or switch).

This is LilyPad Tri-Color LED RGB Module for Arduino with you can blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design – to turn on a channel you simply need to ground one of the R/G/B pins to illuminate that channel. LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable. This is a LilyPad LED Blue Color that is still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into the fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!

This LilyPad Buzzer is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequencies of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud. LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available.

This is a LilyPad LED White Color that is still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up. LilyPad is a wearable e-textile technology. Each LilyPad piece was creatively designed with large sew tabs to allow them to be sewn into the fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care). Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable.

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!