Sensor

UVM-30A UV Sensor Detector Module A Suitable for measuring the total amount of sunlight UV intensity. It controls the grading standards of the World Health Organization UV Index. The UV Sensor is used for detecting the intensity of incident ultraviolet(UV) radiation. This form of electromagnetic radiation has shorter wavelengths than visible radiation. This module is based on the sensor UVM-30A, which has a wide spectral range of 200nm-370nm. The module outputs an electrical signal which vary with the UV intensity, which gives your suggestion if it is a good idea to beach today.

Features:

• Designed for applications requiring high reliability and precision measuring UV Index (UVI) designed for the occasion.
• Suitable for measuring the amount of UV intensity of sunlight.
• Control World Health Organization classification standard UV Index.
• Fast response, full interchangeability.
• Linear voltage signal output.
• Small size, suitable for mobile phones and other portable products.

Package Included:

1 x UVM-30A UV Sensor Detector Module for Arduino Development Board Ultraviolet Ray Detection Sensor Module

GP2Y1010AU0F is an optical air quality sensor, designed to sense dust particles. An infrared emitting diode and a phototransistor are diagonally arranged into this device, to allow it to detect the reflected light of dust in air. It is especially effective in detecting very fine particles like cigarette smoke and is commonly used in air purifier systems.

The sensor has a very low current consumption (20mA max, 11mA typical), and can be powered with up to 7VDC. The output of the sensor is an analogue voltage proportional to the measured dust density, with a sensitivity of 0.5V/0.1mg/m3.

DSM501A PM2.5 Dust Sensor Module can sense tobacco smoke and pollen, house dust, such as a heating automatic suction device, adjustable resistance is set up to detect the size of the dust. Using the same particle counter principle as the foundation, to detect the absolute number of particles per unit volume.

Features:

• PM2.5 Dust Sensor Module can sense tobacco smoke and pollen, house dust and so on
• PM2.5 Dust Sensor Module can measure 1 micron or more of small particles
• Small size, lightweight, easy to install
• 5 V input circuit for signal processing
• PM2.5 Dust Sensor Module has built-in airflow generator, you can attract the external atmosphere
• Maintenance is simple and can keep the characteristics of the sensor for a long time

The Autonics Cylindrical Type Inductive Proximity Sensor stands as a cutting-edge solution in the realm of industrial sensing technology. Precision-engineered for reliability and efficiency, this sensor is a key component in automation and control systems. The cylindrical design ensures versatility in installation, allowing for seamless integration into various industrial setups.

Built with advanced inductive technology, this sensor excels in detecting the presence of metallic objects without direct contact, making it an ideal choice for applications where non-contact sensing is essential. The Autonics Cylindrical Type Inductive Proximity Sensor demonstrates exceptional sensitivity and accuracy, contributing to the overall precision of automated processes.

The sensor's durable construction ensures longevity and performance in demanding industrial environments. Its resistance to environmental factors such as dust, moisture, and vibrations further enhances its reliability. With a user-friendly setup and calibration process, the sensor facilitates straightforward integration into control systems, reducing installation time and enhancing operational efficiency.

Whether employed in manufacturing lines, conveyors, or robotic systems, the Autonics Cylindrical Type Inductive Proximity Sensor proves its adaptability and reliability. This sensor represents a sophisticated solution for industries seeking high-performance sensing technology, showcasing Autonics' commitment to innovation and quality in the field of industrial automation.

These Autonics PR12-4DN Proximity Sensor Series enhance superior noise resistance characteristics with a dedicated IC which Autonics self-developed. Also, the series can be widely used in any applications where proximity sensors are required because of a diverse range of line-ups in terms of size and sensing distance

his is Autonics PR12-2DN Proximity Sensor NPN-NO (Shielded) Series enhances superior noise resistance characteristics with dedicated IC which Autonics self-developed. Also, the series can be widely used in any applications where proximity sensors are required because of a diverse range of line-ups in terms of size and sensing distance.

This PR12-2DN Proximity Sensor generates an electromagnetic field to sense metal objects. It features built-in sensitivity volume and provides no-touch object detection. PR12-2DN Proximity Sensor uses a magnetic field to detect objects. Capacitive sensors use an electric field. To be sensed by an inductive sensor, an object must be conductive.

This limits suitable targets to metal objects (for the most part). To be sensed by a capacitive sensor, the target doesn't need to be conductive. A capacitive sensor will react to an object acting as a dielectric material as well as a conductive object. This makes metal and non-metal objects suitable targets.

Note: This package does not include 2 washers as shown in the image (The package Includes only one washer).

This SW-520D Tilt Switch can easily be used to detect orientation. Inside the can is a ball that makes contact with the pins when the case is upright. Tilt the case over and the balls don’t touch, thus not making a connection. There are numerous uses for the SW-520D Tilt Switch, but keep in mind you might need to use some debouncing code, as the sensor isn’t immune to small vibrations and such.

In many applications, we need to make sure that the system we developed must remain in a specific orientation like in robotics or vehicles on the road or big machinery working in dangerous environments. These systems pose a threat to the lives and safety of the surrounding workers or other living things if they have an accident and crash while their electrical systems are still working. To counter this threat, we have this SW-520D Tilt Switch which detects the inclination of the system concerning the vertical axis and automatically turns off the switch if the inclination exceeds 15°.

SW-520D Tilt Switch will come in handy if your machinery falls like bike crashes and other accidents as it will turn off the electrical supply thereby minimising the risk of fire by short-circuiting. SW-520D Tilt Switch comes in a fully sealed, waterproof and dustproof package so that you won’t have to worry about the working environment of this sensor.

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.

Grove-Piezo Vibration Sensor is suitable for measurements of flexibility, vibration, impact and touch. The module is based on PZT film sensor LDT0-028. When the sensor moves back and forth, a certain voltage will be generated by the voltage comparator inside of it. A wide dynamic range (0.001Hz~1000MHz) guarantees an excellent measuring performance. And, you can adjust its sensitivity by adjusting the on-board potentiometer with a screw.

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.

The QR code + RFID card reader is a new generation of smart card readers. The appearance of the product adopts the standard 86-box industry standard. It has a fast scanning speed, a high recognition rate, and strong compatibility. It can be connected to any Wiegand input Controller, suitable for various application scenarios. At present, it is widely used in business office building visitor entry management, scenic tourist staff management, community visitor entry and exit management, administrative hall access control management, supporting gates, access control, visitor machines, smart homes, etc.; it is a perfect upgrade for the traditional credit card system of various industries.

This X1 RFID Access Control works with 125 Khz card only, password only, card + password, or password working in one single door controller. X1 RFID Access Control uses a chip that is up to industrial-grade single chip. With high stability, large capacity, full function, and reaction fast and simple operation. X1 RFID Access Control is best if used in company offices, factories, houses, residential quarters and so on.

Built-in sensor chip together with programmable system ensures quick response to clicking, which has little error. Door Access Control System supports card and password recognition, also has a USB function and is standalone working without connecting to a computer. The Door Access Control System works stably under DC 12V, the simple wiring, lightweight and compact size make the installation very convenient. The Door Access Control System prevents any possible danger or interference from the outside, which helps to maximize work productivity and increase your home/office security.

Features:

• It has an 86 box structure design, easy to install.
• Identification way: Fingerprint/Password/ card.
• Can read the fingerprint under the sunshine.
• No need to connect with a computer, there easy connection.
• Can be used as a fingerprint reader or access controller, Input/Output WG26/WG34.

Package Included:

 

1 x Magnetic Door Locks, Door Access Control System, Password Biometric Access Control System For Office, Home

This is a PIR Motion Sensor AC 220V this switch can detect the human body’s infrared, and use it to control the load. The PIR Motion Sensor has an adjustable time delay according to actual needs.

The AHT10, a new generation of temperature and humidity sensors, sets a new standard in size and intelligence: it is embedded in a dual-row flat lead-less SMD package for reflow soldering with a 4 x 5mm bottom and a height of 1.6mm. The sensor outputs a calibrated digital signal in standard I 2C format.

The AHT10 is equipped with a newly designed ASIC-specific chip, an improved MEMS semiconductor capacitive humidity sensing element and a standard on-chip temperature sensing element. Its performance has been greatly improved beyond the reliability level of previous generation sensors. The first generation of temperature and humidity sensors has been improved to make them more stable in harsh environments.

This sensor gives a calibrated digital signal output in standard I2C format. The AHT10 is equipped with a newly designed ASIC-specific chip, an improved MEMS semiconductor capacitive humidity sensing element and a standard on-chip temperature sensing element. Its performance has been greatly improved beyond the reliability level of previous-generation sensors

The Soil Moisture Sensor is an electronic device designed for precise automatic control of irrigation systems based on soil humidity levels. This Soil Moisture Sensor Module is equipped with a soil sensor that measures soil moisture and sends signals to the controller to adjust the watering frequency and duration.

The Soil Moisture Sensor Module has a red digital display that shows the current humidity level in percentages ranging from 20% to 99% RH. The display also shows the status of the irrigation system, including whether it is on or off, and the set-point humidity level. The probe can be inserted directly into the soil. It is a digital display of soil moisture.  

Features:

 

• Very easy to use
• Adjustable humidity control range
• Soil Moisture Sensor has delay function
• Soil Moisture Sensor has high precision

HB100 Miniature Microwave Motion Sensor is an X-Band Bi-Static Doppler transceiver module. It has a built-in Dielectric Resonator Oscillator (DRO) and a pair of Microstrip patch antenna arrays, making it ideal for usage in motion detection equipment. This module is ideal for alarms, motion detectors, lighting control, vehicle speed measurement, and automatic doors. Low current consumption (typical 30 mA) CW or pulse operation Flat profile Long detection range (20 m) Supply

Applications:

• Automatic door startup
• House intrusion alarm
• Collision warning
• Traffic monitoring

Caution:

Please use a low-voltage soldering iron and connect it to a reliable grounding. This device is sensitive to ESD and it may be damaged during soldering. The IF output of the HB100 module is especially sensitive. You can check it for damage using a multimeter in diode mode. The forward voltage drop between IF and GND should be about 0.25 V.

Package Included:

1 x HB100 Microwave Sensor Module 10.525GHz Doppler Radar Motion Detector Sensor Module

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.

Rd-03 is a radar module developed by Ai-Thinker. It is equipped with silicon micro-S3KM1110 chips. S3KM1110 is an integrated single-chip millimeter-wave sensor SoC based on FMCW radar transceiver technology. Operates in 24 GHz K-band with up to 1 GHz modulation bandwidth per frequency. FMCW continuous wave is used to detect the target in the set space. Combined with radar signal processing and an accurate human body sensing algorithm, high-sensitivity human presence state sensing can be realized to recognize a body in motion and a static state.

The Xiaoyu 2.0 Badminton Sensor is a specialized device designed to analyze and provide feedback on badminton gameplay. It incorporates sensors and technology to track various aspects of a badminton player’s performance, offering valuable insights to help improve skills.

We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.