Model | 20A BLHeli-S OPTO ESC |
Color | Multicolor |
Packaging Type | Box |
Peak Current(10s) | 25A |
Suitable Lipo Batteries | 2-4s |
Continuous Current | 20A |
Country of Origin | Made in India |
TThe Readytosky 20A 2-4S Mini BLHeli-S OPTO ESC is a compact and high-performance electronic module integrated into the power distribution system of a drone. It is designed to provide precise control over the speed and performance of the drone’s motors. The “OPTO” designation typically means that this ESC lacks a built-in Battery Eliminator Circuit (BEC) to regulate and supply power to the flight controller and other onboard electronics. Instead, it’s designed to be used in setups where power distribution and regulation are handled separately.
Specifications:1 x Readytosky 20A ESC 20A 2-4S Mini BLHeli-S OPTO ESC for FPV Race RC Helicopter
Application | Drone |
Speed | 1200 RPM |
Power | 105 W |
Voltage | 200 V |
Phase | Three Phase |
Torque | 0.20 mNm |
Shaft Diameter | 4mm |
This 5010 360KV High Torque Brushless Motor for Drones comes with self-cooling technology, so it will be able to withstand high temperatures up to 140° C (356 F). The motor can produce thrust up to 1500 gm on a 4s Lipo battery.
This brushless motor for the Drone is evaluated by the high torque offered by them. The motor gives an awesome flight experience on behalf of the NdFeB magnets and properly lubricated high-quality ball bearings. They can be paired with 14″ to 16″ HD Propellers and powered by 2S-6S Li-PO Batteries through 20A-40A ESC.
They are equipped with high-temperature wires in the windings of the motor to minimize the burning of the motor. Also, they have high-temperature adhesives that are used to secure the stator windings and prevent them from shifting and getting pinched or shorting out.
Specifications:Arm Size | 23542mm |
Motor Mount Bolt Holes | 16, 19, and 25mm |
Model | S500 |
Board | PCB version |
Color | Black |
Wheelbase | 550mm |
This is the S550 Frame which employs 6 arms to get into the air. There are several advantages of a hexacopter frame over a quadcopter one, justifying the extra price tag.
For 6 arms, of course, there are more motors with a hexacopter meaning more power, meaning bigger batteries. This increase in batteries leads to an increase in flight time, which is also nice. Due to these extra motors, a hexacopter is also more stable than your quadcopter equivalent.
Another great advantage of using the S550 Frame is if for any reason your quadcopter loses a motor, it goes down but with a hexacopter, on the other hand, in the majority of cases you will be able to land safely with one or maybe even two motors down; an extra inbuilt guarantee on your beloved copter.
The S550 Frame has a strong, light, and sensible configuration including a PCB(Printed Circuit Board) with which you can directly solder your ESCs to the Quadcopter. So, making the Quadcopter build fast and easy. So, S550 Frame avoids the use of extra PDB(Power Distribution Board) and makes the mounting clean and neat. The S550 Hexacopter Frame is a highly flexible frame during the mounting of various components like a flight controller, battery, etc.
The S550 Frame kit is an excellent strong lightweight Hexacopter frame with carbon fibre landing gear and a bonus built-in printed circuit board (PCB) for neat and easy wiring. S550 Frame comes with an integrated PCB for neat and easy wiring. The added lift capacity of a hex configuration makes this frame for carrying larger payloads such as camera systems and other electronic components. This makes for an exceptional camera rig or simply a very agile and powerful multi-rotor frame for aerobatics.
S550 Frame comes with pre-threaded brass sleeves for all of the frame bolts, so attaching the arms to the mainframe is done within a few minutes. Also, S550 Frame requires one size of bolt for the overall build and thus a unique one-size hex wrench which makes hardware mounting very convenient.
The assembly of this S550 Frame is super simple with pre-threaded sleeves for all the frame bolts so no lock nuts are required. The motor mounts are ready to take a selection of motors with mounting hole centers of 16, 19 and 25 mm once again making this a very universal frame at a very affordable price.
The S550 Frame has a wheelbase of 550mm and the whole frame kit weighs around 760gm. It features mounting tabs at the front and rear end on the bottom plate of the mainframe for mounting cameras and other accessories.
Note: The dimensions and weight may have a 2% error.
Remote Battery | 2 x AA battery(not included) |
Model | CX-10D |
Remote Control | 2.4GHz Wireless Remote Control |
Channel | 4-Channels |
Gyro | 6-Axis |
Mode | Mode 2 (Left Hand Throttle) |
This is a CX-10D Mini Drone. It has 4 Channels to complete ascend/descend, forward/backward, left/right side-fly, and hand-throw aerobatics. CX-10D Mini Drone has a 6-axis gyro for stabilization, easy-to-control 3-speed modes, high/low-speed shift by yourself, and 360 degrees of speed rolling for stunning flight and effect. CX-10D Mini Drone has one key to fly/land, customized for newbies Battery protection LED light, beautiful landscape in the night sky.
Application | EV |
Speed | 1200 RPM |
Power | 250 W |
Voltage | 12 V |
Phase | Single Phase |
Rotation | CW |
Speed | 1360 RPM |
Application | EV |
Power | 105 W |
Voltage | 24 V |
Phase | Single Phase |
Rotation | CW |
No of Poles | 5 |
Usage/Application | Industrial |
Color | Black |
Packaging Type | Box |
Weight | 15 gm. |
Suitable for | CC3D flight controllers, Naze32, Mini APM etc |
Dimensions | 45 x 45 mm |
Country of Origin | Made in India |
This is a small but very essential component in building the quadcopter or any RC drone using a flight Controller to protect them from vibration while flying as well as with landings.
It absorbs vibration, and the center-supported plate is ideal for sensitive electronics in the flight controller. The flush flat-bottom mounting allows bolt or tape-style attachment.
The rectangle mount can be used on a number of Flight controllers, such as APM, Pixhawk, CC3D Flip32 Naze32 Mini APM Flight controller as well as the Mobius camera or even a GoPro turned sideways. And comes with some additional mounting tape.
Phase | Triple Phase |
This 20A Brushed Electronic Speed Controller is a small-sized ESC that can supply a current of up to | 3 -9V DC |
Constant Current | 20A |
Maximum Current | 25A |
Battery Input | Li-Po 2S |
Driver Frequency | 2KHz |
This 20A Brushed Electronic Speed Controller is a small-sized ESC that can supply a current of up to 20A by using a 2S lipo battery as an input. The ESC accepts a standard RC signal as input and offers functions as forward, reverse, and breaking. This ESC has high-quality silicone cables for the battery input and the motor output.
Specification:1 x 20A Brush ESC 20A Brushed Electronic Speed Controller w/Brake for RC Car Boat Tank
Phase | Single Phase |
Current | 40A |
BEC Output | 5V 3A |
Burst Current | 55A |
BEC Mode | Linear |
BEC Output Capability | 5 Servos (2S Lipo) / 4 Servos (3S Lipo) |
Battery Cell | 2-3S (Lipo) / 5-9 cells (NiMH) |
This is a Brushless motor driver with a current of up to 40A. The optimal power supply is 2S - 3S li-pol packs (7.4 V to 11.1 V). It has a UBEC 5 V / 3 A regulator. The Hobbywing Skywalker-40A-UBEC is an electronic speed controller (ESC) designed for remote-controlled hobby aircraft and drones. It is capable of handling up to 40 amps of current and features a built-in UBEC (Universal Battery Elimination Circuit) that regulates voltage to power the receiver and servos.
The Hobbywing Skywalker-40A-UBEC also has a smooth and linear throttle response, making it ideal for precision flying. Additionally, the ESC is programmable via a computer or programming card, allowing users to customize throttle response, braking, and other parameters to their liking. The compact and lightweight design of the Hobbywing Skywalker-40A-UBEC makes it easy to install and ideal for use in small to medium-sized aircraft and drones
1 x HobbyWing SkyWalker 40A ESC 40A 2-3S LiPo ESC Brushless Speed Controller UBEC for RC Airplane
Weight | 32gm |
Low noise | 3.3V regulator |
Diameter | 60mm |
Ublox Neo | M8N module |
Cold starts | 26s |
Country of Origin | Made in India |
This is the new Ublox Neo-M8N GPS module that includes an HMC5883L digital compass. This module has a high level of sensitivity and features active circuitry for the ceramic patch antenna. It also comes enclosed in a plastic case to protect the module from the elements.
This module outputs precise position updates at 10Hz and also has a rechargeable backup battery for warm starts. The Ublox NEO-M8N is configured to run at a baud rate of 38400 and ships for use with Pixhawk and APM (you might need to modify the cable to fit your autopilot board).The most important improvement with this module is the vast sensitivity it offers.
This module receives concurrent reception from GPS/QZSS, GLONASS and BeiDou meaning that you should get an excellent signal no matter where you are in the world. Not only does it have this excellent reception capability, but it also maintains its low power consumption. This module is also backwards compatible with the NEO-7, NEO-6, and NEO-5 families.
Features:1 x Neo M8N GPS Module Compass with Holder for APM 2.5 2.6 2.8 Pixhawk CC3D Naze32 F3 Flight Controller
Color | Black |
Type | Wired |
Weight | MC: 25gm VU: 20gm GPS: 21.3gm |
Operating Voltage | MC: 45.5mm x 31.5mm x 18.5mm VU: 32.2mm x 21.1mm x 7.7mm GPS & Compass: 46mm(diameter)x9mm |
Power Consumption | MAX1. 5W (0.3A@5V) Normal:0.6W (0.12A@5V) |
Dimensions | MC: 45.5mm x 31.5mm x 18.5mm VU: 32.2mm x 21.1mm x 7.7mm GPS & Compass: 46mm(diameter)x9mm |
The DJI NAZA-M Lite V1.1 with GPS Kit is a simplified version, inheriting the high reliability and stability of the Naza M flight controller’s heritage. The Naza M Lite controller has an all-in-one design which means the installation is easy while saving space and weight. In this small flight controller, you will find inner damping, a 3-axis gyroscope, a 3-axis accelerometer and a barometer. The Naza M Lite measures flying altitude and attitude which is used for autopilot / automatic control for altitude hold, the GPS provides a position hold capability enjoyed on the Naza M V2 and DJI Wookong M flight controllers. The Naza M Lite GPS is the most cost-effective solution to offer so much from the DJI Innovations line of flight controllers.
The Naza M Lite v1.1 GPS offers three flight modes, GPS Atti. Mode, Atti. Mode and Manual Mode. The pilot can switch between these modes to achieve different flight characteristics. A new feature for the Naza M Lite GPS is the automatic adjustment while in the flight of the flight modes; the Naza M Lite v1.1 GPS will gently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure without user intervention.
Intelligent Orientation Control (IOC) means that no matter where the nose is pointing the forward direction is still the forward direction, and has nothing to do with the nose direction, there is no need to be concerned with the loss of orientation when using the IOC mode, the front will always be front, even when it’s back.
If you have a transmitter which supports failsafe features compatible with the Naza M Lite, like the Futaba 8J, you can set the failsafe through port U on the flight controller. The Naza controller has built in an auto level failsafe function, if the communication between Naza and the transmitter is lost, the outputs of all command sticks from the RC controller will default to the centre position, and the GPS module also allows you also set RTH (Return To Home) in the event of the failsafe being used. If your transmitter has only 4 channels, then MC will work in Atti—mode by default without the failsafe function.
The Naza M Lite GPS also has outputs for use with a servo-operated gimbal. Adding a gimbal to the system is easy with an easy-to-follow setup and calibration procedure. Please note the Lite will not work with the DJI Zenmuse H3 3D Brushless Gimbal.
Current Rating | 16A |
Rated Voltage | 220/240 V |
Material Type | Glass Fiber |
Length | 50mm |
Width | 50mm |
Country of Origin | Made in India |
This is Drone Power Distribution Board Soldered XT60 Plug & 3.5mm Banana Bullet Connectors For 250mm Multicopter FPV. These lightweight distribution boards make powering multi-rotor aircraft easy.
Simply solder a battery connection onto the two central terminals, and you've got eight pairs of connections to use perfect for quadcopters, hexacopters, and even octocopters.
The Drone Power Distribution Board equips Soldered XT60 Plug & 3.5mm Banana Bullet Connectors is great for smaller multirotor builds. They're compact and lightweight and offer large solder pads making them easy to work with.
These Drone Power Distribution Board can handle some serious current up to 20A per output for a quadcopter build or drop that down to 10A each for an octocopter.
1 x Drone Power Distribution Board ESC Power Distribution Board Soldered XT60 Plug and 3.5mm Banana Bullet Connectors For 250mm Multicopter FPV
Current Rating | 16A |
Phase | Single Phase |
Rated Voltage | 220/240 V |
Pack Type | Box |
Output Ripple | 40mV (VIn= 16V, VOut= 5V@2A load) |
Country of Origin | Made in India |
PDB-XT60 with BEC 5V and 12V Power Distribution Board has been engineered to provide the highest possible performance and reliability in a 36x50mm, 4-layer PCB. It comes with an XT60 for easy connection to LiPo batteries.
Using BEC it distributes power from 3~4S LiPo packs to 6 ESCs, as well as providing synchronized and regulated DC 5V outputs for RC Receivers, Flight controllers, OSD, and Servos.
It also provides linear regulated DC 12V for powering Cameras, Servos, RC receivers, Flight Controllers, Video Transmitters, LEDs, etc. It offers an XT60 socket to connect the LiPo pack conveniently.
ThePDB-XT60 with BEC 5V and 12V is a great package to get your Racing Drones powered up for racing.
Features:
Current Rating | 16A |
Phase | Single Phase |
Rated Voltage | 220/240 V |
Material Type | Glass, Fiber |
Board Dimensions | 50 x 50 x 2 mm |
Country of Origin | Made in India |
Remote Control Distance | 100 Meters |
Packaging Type | Box |
Charging Time | About 60-80 minutes |
Model Number | DM002 |
Gyro | 6 Axis |
Flight Time | About 7 minutes |
Battery For Quadcopter | 3.7V 300mAh Lipo Battery |
Country of Origin | Made in India |
This DM002 DIY drone has strong wind resistance, and strong stability and can easily perform various flight actions. It can help you control the drone outdoors and indoors, providing an excellent flight experience.
The DM002 Mini DIY Drone is a great and inexpensive drone kit. You don’t need serious mechanical skills or even the ability to solder to put it together. It really is a great way to understand the components that go into a (hint: there is a lot less to them than you might think). When you are done putting it together, you’ll have an excellent quadcopter that is fun to fly. You’ll be hard-pressed to find a more inexpensive drone that performs as well as the DM002. The DM002 is a quick and nimble quadcopter that is fairly easy to fly.
It has three different speeds making it easy to learn in slow mode, and when you get comfortable you can bump it up to medium and when you are feeling ready go full speed in high mode. The DM002 will also flip with the push of a button.
ascend/descend/forward / backward/side flying / Slow/Medium/High speed/turn round / 360°rolling action / 360° accurate localization / LED / One key return.
Phase | Single Phase |
Current | 1A |
Casing Material | Plastic |
Voltage | 220V AC |
Usage/Application | Electrical |
Mounting Type | Panel Mount |
Material | Carbon Fiber |
Packaging Type | Box |
Color | Black |
Usages Application | T-Motor |
Surface Finish | Polished |
Weight | 100gm |
Country of Origin | Made in India |
The high-performance 1555 Propeller was created especially for fans of T-Motors. These precisely constructed propellers will increase the effectiveness and power of your drone. They are made of tough carbon fibre for maximum performance and durability.
Achieving stable flight and fine control is simple with options for rotation in both the clockwise (CW) and counterclockwise (CCW) directions. Upgrade to the 1555 Carbon Fiber Propeller to elevate your T-Motor experience to new heights and enjoy the ideal marriage of innovation and excellence.
The innovative 1555 Propeller, painstakingly crafted for T-Motor enthusiasts, will improve the performance of your drone. These propellers are made from premium carbon fibre and are designed to improve your flight experience, guaranteeing consistent durability and outstanding efficiency.
1 x 1555 Propeller 15x5.5 2 Blades Carbon Fiber CW/CCW Propeller For T-Motor
Material | PVC |
Pattern | Plain |
No. of Ports | 5 |
Model Number | RS4817 |
Packaging Type | Box |
Color | Black |
Country of Origin | Made in India |
The Pixhawk I2C Splitter expands the I2C port to allow up to four additional peripheral connections for Pixhawk. Use the 4-wire cable to connect the I2C splitter and add a compass module, external LED, digital airspeed sensor, or other peripherals to your vehicle. It is a useful tool and very convenient to connect.
Pixhawk/APM flight controls only one I2C interface, such as the need to connect more than one I2C peripheral, you can use the line board; Pixhawk – I2C points line board with five completely parallel vertical 1.25 4 a socket, convenient connection in the form of 1 drag 4 four I2C peripherals, for example, at the same time use the external compass and RGB modules. I2C line board and Pixhawk flight control the appearance of the connection.
Specifications:1 x Pixhawk I2C Splitter Pixhawk I2C Port Expand Board with Cable
Operating Voltage | 12V |
Material | Pvc |
Max input voltage | 20V |
witching regulator output | 5.3V and 2.25A max |
Max current sensing | 90A |
Voltage and current measurement configured for | 5V ADC |
Country of Origin | Made in India |
The APM 2.5 Power Module is a simple way of providing your APM 2.5 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The onboard switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery. The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection.
Features:Used to detect the battery voltage and the battery current, the flight control board receives two signals, calculates the remaining battery power, estimate the remaining flight time. In addition, the module also comes with a BEC function, you can output 5.3 DC, 3A maximum continuous current for the flight control board to provide a stable power supply. Another signal cable connector is used in Japan's original fittings, non-domestic joint, so the APM flight control board and reliable connection between the power supply module.
*Note:The Power Module is only designed to power APM, an RC receiver and APM accessories (GPS, 3DR radio). It is notdesigned to power servos. Use your aircraft's own ESC/BEC for that.
Length | 1m |
Cable Conductor | Aluminium |
Usage/Application | Camera |
Material | PVC |
Cable Jacket | Rubber |
Pack Type | Box |
Country of Origin | Made in India |
This is RC USB flight simulator. This RC USB Flight Simulator supports G7, Phoenix RC5.0, Reflex XTR, VRC. This RC USB Flight Simulator is suitable for RC helicopters, quadcopters, aeroplanes. This universal RC USB Flight Simulator adapter dongle allows you to connect a variety of different RC transmitters to your PC or Mac for use in Flight Simulators such as FPV Freerider, Aerofly RC, Phoenix RC, Liftoff, Hot Props, RealFlight, DRL, and more.
RC USB Flight Simulator is a great way to practice for RC pilots of all skills and all crafts. Particularly for new pilots, simulators save time and money on repairs and allow you to get much more flight time in than you would be able to in real life. Plus they are fun! Please note, no simulation software is included with this listing. Also, this is designed to be used with RC simulators only, not as a general game controller.
Features: