Push Button

It is a Push Button Cap for a Momentary Tactile Push Button Switch 12 x 12 x 7.3 mm. The Push Button Cap fits on a 12 x 12 x 7.3 mm tactile push button switch. It fits perfectly on a 3.4 x 3.8 mm button square shaft with a locking notch.

Specifications:

• Material: Plastic
• Colour: Yellow

Features:

• Easy to install, good quality for long-time use.
• Great replacement for the old or broken button cap on the tactile switch.
• Fits on a 12 x 12 x 7.3 mm tactile push button switch.

Package Included:

1 x Push Button Cap 12x12x7.3 mm Round Cap for Square Tactile Switch - Yellow

The button switchboard can sensitively sense the movement and enables better control of the operation 3-pin and 1-position design ensures stable working performance and has AC250V dielectric strength as well. Having been through repeatedly debugging, the anti-interference circuit has a large heat dissipation area, is very practical provides you with good work experience, and improves work efficiency. It comes with a lightweight and compact size, the convenient installation is suitable for a DIY starter. High-quality components are used, to ensure its strong function, stable performance and high compatibility.

It is a Push Button Cap for a Momentary Tactile Push Button Switch 12 x 12 x 7.3 mm. The Push Button Cap fits on a 12 x 12 x 7.3 mm tactile push button switch. It fits perfectly on a 3.4 x 3.8 mm button square shaft with a locking notch.

Specifications:

• Material: Plastic
• Colour: Green

Features:

• Easy to install, good quality for long-time use.
• Great replacement for the old or broken button cap on the tactile switch.
• Fits on a 12 x 12 x 7.3 mm tactile push button switch.

Package Included:

1 x Push Button Cap 12x12x7.3 mm Round Cap for Square Tactile Switch - Green

It is a Push Button Cap for a Momentary Tactile Push Button Switch 12 x 12 x 7.3 mm. The Push Button Cap fits on a 12 x 12 x 7.3 mm tactile push button switch. It fits perfectly on a 3.4 x 3.8 mm button square shaft with a locking notch.

Specifications:

• Material: Plastic
• Colour: Blue

Features:

• Easy to install, good quality for long-time use.
• Great replacement for the old or broken button cap on the tactile switch.
• Fits on a 12 x 12 x 7.3 mm tactile push button switch.

Package Included:

1 x Push Button Cap 12x12x7.3 mm Round Cap for Square Tactile Switch - Red

It is a Push Button Cap for a Momentary Tactile Push Button Switch 12 x 12 x 7.3 mm. The Push Button Cap fits on a 12 x 12 x 7.3 mm tactile push button switch. It fits perfectly on a 3.4 x 3.8 mm button square shaft with a locking notch.

Specifications:

• Material: Plastic
• Colour: Blue

Features:

• Easy to install, good quality for long-time use.
• Great replacement for the old or broken button cap on the tactile switch.
• Fits on a 12 x 12 x 7.3 mm tactile push button switch.

Package Included:

1 x Push Button Cap 12x12x7.3 mm Round Cap for Square Tactile Switch - Blue

12x12x7.3mm Tactile 4 Pin Push Button Switch is fully compatible with the B3F-4055 Switch. It has 4 pins, 2 pins on each side are connected. So, pressing the switch connects all 4 pins. It has a current capacity of 100 mA. The top of the switch is such that, the cap can be easily fitted onto it. Also, the cap has a locking mechanism on top of the switch, so, it will not get removed easily.

12x12x7.3mm Tactile Push Button Switch is widely used as a standard input “button” on electronic projects. These work best when you mount them on PCB but can also be used on a solderless breadboard for temporary connections in prototypes. The pins are normally open (disconnected) and when the button is pressed they are momentarily closed and complete the circuit.

This Push Button also offers reliable dome contact technology and strong tactile feedback, with multiple operating forces to choose from. Applications include telecommunications, consumer electronics, audio/visual, medical devices, button testing/instrumentation, and computer/peripherals.

Tactile Switch consists of a simple electric switch mechanism which controls some aspect of a machine or a process. Buttons are typically made out of hard materials such as plastic or metal. The surface is usually shaped to accommodate the human finger or hand, so the Tactile Switch can be easily depressed or pushed. Also, most Tactile Switch is known as a biased switch, known as the push button. This is very easy to use.

A two-channel relay module (HCMODU0115) featuring 2x Omron G3MB-202P solid state relays. This 5V 2 Channel SSR G3MB-202P Solid State Relay Module is capable of switching AC voltages between 100 and 240V at up to a 2A current. The module can be controlled from a 5V digital source such as an Arduino microcontroller. A resistive type fuse is provided on the module to help protect excessive current draw. This 5V 2 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse is based on the Omron G3MB SSR relay which can control up to 2A at 240VAC. This is a 2 Channel SSR relay module, each relay channel has 3 separate terminals, NO (Normal Open), COM (Common), NC (Normal Closed). A Solid State Relay is similar to a mechanic relay where it can be controlled through a digital signal. Solid State Relay generates no noise and has a much longer lifespan in compared to the traditional mechanic relay. When the input logic voltage is applied to the coil, the NC will disconnect from the COM breaking the conductivity between the two. At the same time, the NO will connect with the COM allowing conductivity between them. Depending on your wiring this will turn on or off the connected load.

It is a Push Button Cap for a Momentary Tactile Push Button Switch 12 x 12 x 7.3 mm. The Push Button Cap fits on a 12 x 12 x 7.3 mm tactile push button switch. It fits perfectly on a 3.4 x 3.8 mm button square shaft with a locking notch.

Features:

• Easy to install, good quality for long-time use.
• Great replacement for the old or broken button cap on the tactile switch.
• Fits on a 12 x 12 x 7.3 mm tactile push button switch.

Package Included:

1 x Push Button Cap 12x12x7.3 mm Round Cap for Square Tactile Switch - White

It is a Push Button Cap for a Momentary Tactile Push Button Switch 12 x 12 x 7.3 mm. The Push Button Cap fits on a 12 x 12 x 7.3 mm tactile push button switch. It fits perfectly on a 3.4 x 3.8 mm button square shaft with a locking notch.

Specifications:

• Material: Plastic
• Colour: Black

Features:

• Easy to install, good quality for long-time use.
• Great replacement for the old or broken button cap on the tactile switch.
• Fits on a 12 x 12 x 7.3 mm tactile push button switch.

Package Included:

1 x Push Button Cap 12x12x7.3 mm Round Cap for Square Tactile Switch - Black