3D Printers, Pens & Accessories

An Aluminum Heater Block for MK7 / MK8 3D Printer is a crucial component used in 3D printers to control and maintain the temperature of the nozzle. The heater block is made of aluminium, which is known for its excellent thermal conductivity. This allows it to efficiently distribute heat to the nozzle.

It is designed specifically for use with MK7 and MK8 style 3D printer hotends. These are common types of hotend assemblies used in many 3D printers. The aluminium material provides good thermal stability, helping to ensure consistent and reliable temperature control during printing.

The heater block plays a role in dissipating excess heat generated by the heating element to prevent overheating. It typically has threaded openings to secure the heating cartridge, thermistor, and nozzle in place.

• Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)

• Resistance: Material: 304 stainless steel
• Lead wire: 0.3 square
• 2080 high temperature resistant high-quality oxide powder

• For 3D printers: use TEMP_SENSOR 11 in Marlin firmware
• Resistance value at 25øC=100K

The Aluminum Heater Block is a crucial component for MK7 and MK8 3D printers. It enhances heat distribution, ensuring consistent and precise extrusion. This results in higher-quality prints with smoother surfaces and finer details.

Crafted from high-grade aluminium, this heater block is built to last. It can withstand high temperatures and continuous operation, making it a reliable choice for your 3D printing projects.

The stepper motors move in precisely repeatable steps, hence they are the motors of choice for the machines requiring precise position control. The 4.8 kg-cm NEMA17 Stepper Motor can provide 4.8 kg-cm of torque at 2.5A current per phase.

The motor's position can be commanded to move or hold at one position with the help of Stepper Motor Drivers. The 4.8 kg-cm NEMA17 Stepper Motor provides excellent response to starting, stopping and reversing pulses from the stepper motor driver.

They are very useful in various applications, especially those that demand low speed with high precision. Many machines such as 3D Printers, CNC Router and Mills, Camera Platforms, XYZ Plotters etc.

It is a brushless 4.8 kg-cm NEMA17 Stepper Motor, so the life of this motor is dependent upon the life of the bearings. The position control is achieved by a simple Open Loop control mechanism so doesn't require complex electronic control circuitry.

4.8 kg-cm NEMA17 Stepper Motor comes with a detachable 72cm cable which makes wiring and rewiring very fast and easy to work. The design of this cable is such that it can directly be mounted on a stepper motor controller. So, playing with the connection is done with just a snap of the fingers.

The 4.8 kg-cm NEMA17 Stepper Motor D-type shaft has been machined for good grip with a pulley, drive gear etc., and especially avoiding stall or slip.

• The input pulse decides the rotation angle of the motor.
• 4.8 kg-cm NEMA17 Stepper Motor has high accuracy of around 3 to 5% a step.
• 4.8 kg-cm NEMA17 Stepper Motor provides good starting, stopping and reversing.
• Control of this motor is less costly because of the exclusion of complex control circuitry.
• The speed is proportional to the frequency of the input pulses.

1 x 4.8 kg-cm NEMA17 Stepper Motor NEMA17 4.8 kg-cm Stepper Motor with Detachable 72 CM Cable

A stepper motor to satisfy all your 3D-Printer, robotics, and Linear Motion projects needs! This 4-wire bipolar Nema 17 Stepper Motor has 1.8° per step for smooth motion and nice holding torque. The Nema 17 Stepper Motor was specified to have a max current of 1.7A/phase so that it could be driven easily with a common motor shield for Arduino (or another motor driver) and a wall adapter or lead-acid battery. The rubber covering the rotor can reduce the noise effectively. The high hardness of metal makes it tough and durable. The Nema 17 Stepper Motor with 4 leads, is used in various areas, such as laser engraving, medical equipment, 3D printers, CNC parts, automation equipment etc.

• The input pulse decides the rotation angle of the motor.
• Nema 17 Stepper Motor has high accuracy of around 3 to 5% a step.
• Provides good starting, stopping and reversing.
• Control of this motor is less costly because of the exclusion of complex control circuitry.
• The speed is proportional to the frequency of the input pulses.

1 x Nema 17 Stepper Motor 4-lead Nema 17 Stepper Motor 42 Nema 17 42BYGH (17HS4401) 40mm 1.7A 3D Printer Motor

SK8 Aluminum Linear Rod Rail Shaft Support XYZ Shaft Table CNC Router SH8A design End Support is used mainly to support Hard Chrome Plated Rods in CNC Routers, CNC Engraving machines, 3D Printing Machines, Cashew Nut Shelling Machines, Pick and Drop Machines, Robots for Industrial Automation.

These Linear bush end support Linear guide end support Linear shaft end support Hard chrome plated rod end support Chrome plated rod end support Chrome plated rod support Linear shaft support Chrome bar Hard chrome bar.

• Model: SK8
• Material: Aluminum Alloy
• Fit Shaft Diameter: 8mm/0.31inch
• Mounting Hole Diameter: 5.5mm/0.22inch
• Mounting Hole Distance: 32mm/1.26inch

• Shaft support blocks are used for end or intermittent support where loads are light and slight shaft deflection is not a concern.
• Shaft support blocks enable the clamping of shafts, removing the need for bolts to maintain shaft position.
• Shaft guides are an economic and widely used linear guide system for many applications.
• Widely used for digital 3D coordinate measuring equipment such as precision equipment or special machinery industry.

1 x SK8 Aluminum Linear Rod Rail Shaft Support 8mm Linear Motion Guides SK8 8MM Linear Bearing Rail Support XYZ Shaft for CNC 3D Printer

The GT2 Timing Pulley offers precise motion control at a very low cost. The GT2 series of belts and pulleys are designed specifically for precise linear motion. They use a rounded tooth profile that guarantees that the belt tooth fits smoothly and accurately in the pulley groove, so when you reverse the pulley direction, there is no room for the belt to move in the groove.

This pulley is meant for use with GT2 6mm wide belts only - MXL belts will slip due to the different tooth profiles. This GT2 Timing pulley has 16 teeth and a 5mm inner bore. Two set screws can be used to attach it firmly to any 5mm diameter shaft such as our NEMA17 stepper motors. Full aluminium construction means these are very light and very durable.

• Material: Aluminium
• Inner Diameter: 5mm
• Outer Diameter: 13mm
• Compatible With: M4x4
• No. of Teeth: 16

Precision in Every Revolution-

The GT2 Timing Pulley (16 Tooth) ensures precise motion control in 3D printers, CNC machines, and other mechanical systems. With its accurately machined teeth, it guarantees smooth and synchronized movement.

Durable and Reliable Performance-

Crafted from high-quality materials, this timing pulley is built to last. It resists wear and deformation, providing reliable performance even under continuous use. This ensures your machinery operates at its best for an extended period.

Easy Installation and Low Maintenance-

Installing the GT2 Timing Pulley is straightforward, making it a hassle-free upgrade for your machinery. Once in place, it requires minimal maintenance, allowing you to focus on your projects without constant adjustments.

1 x GT2 Timing Pulley Aluminum GT2 Timing Pulley 16 Tooth 5mm Bore For 6mm Belt

An Optical Endstop Switch is an electronic component used in 3D printers, CNC machines, and other automated systems to accurately determine the position of moving parts.

This fully assembled plug-and-play Optical Endstop Switch is very suitable for your 3D printing or CNC project. The Optical Endstop Switch will immediately output the digital control when the light is blocked and turn the LED on.

The optical end-stop is a reliable end-stop / switch solution for any type of 3D printer and other CNC and 3D tools. Using the optical transmission principle designed, no loss, no noise, and longer service life reached more than one hundred thousand times.

The primary function of an optical endstop switch is to detect the presence or absence of an object (usually a moving component, like an axis) at a specific point in its travel. It uses an optical sensor to perform its function. The sensor typically consists of an infrared light source and a receiver.

• Operating Voltage: 2.7~5V
• Sensor: TCST2103
• Dimensions : 33 x 11 x 10 mm

• Increased reliability
• Increased precision
• Optical Endstop Switches help to protect your 3D printer or machine from moving past its intended range and damaging itself.

• 1 x Optical Endstop Switch Light Control Limit Optical Switch
• 1 x 1m 3-pin wire

ME-8108 Rotary Adjustable Roller Lever Arm Mini Limit Switch also named the POSITION SWITCH, is a commonly used small current main electrical appliance, the contact action is realized through the collision of the moving parts of the production machinery or segmented control circuit, achieving certain control target.

The lever arm can be rotated to the left by 90° degrees and to the right by 90° degrees. Perfect for electrical control switches in mechanical and other industries; This Limit Switch can be widely used in various machines to monitor the position of moving parts of machines and plants; Please pay attention to the Voltage Rating and check with the voltage of your place to make sure the Limit Switch successfully works.

MGN15H Linear Guide Rail 0.5M is a linear rail used for 3D printing, CNC machine PCB/IC assembly, etc. This guide rail is to be used with the MGN15H rail block. The rail is used for smooth and precise linear motion. MGN15H Linear Guide Rail is fit for Semiconductor manufacturing equipment, printed circuit board IC assembly equipment, and medical equipment. Also used in machine arms, precision measuring instruments, office automation equipment, and other small linear sliding devices.

• It has good quality.
• It is strong and durable.
• The tool is simple and easy to use.
• With a steel ball holder/retainer.

1 x MGN15H Linear Guide Rail - 0.5M (500mm)

This complete V6 Hotend Full Kit for 1.75 mm filament 0.4 mm Nozzle contains the same signature high-temperature performance for high-temp printing, as well as increased functionality for printing soft and flexible filaments. This kit contains the old thermistor, heater block, sleeving, and cooling fan with holder.

With High-Temperature Performance, you can print with high-temp materials like Polycarbonate and Nylon – this also eliminates Hotend meltdown failures that are common with PTFE designs. Even though the v6 has a PTFE liner inside the hotend the liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating.

Basically, this design is really in tune with all the elements, so your prints will come out crisp and accurate.

The V6 Hotend allows you to print a wide variety of materials, from soft and flexible to sturdy and strong. This is possible due to the PTFE (Polytetrafluoroethylene) liner tube through the hotend that you can extend into your extruder – this gives the ability to add the confinement and constraint needed to make excellent quality prints with flexible filaments.

This technology opens new doors for your 3D printing aspirations.

The V6 Hotend has cut back on a bunch of bulk. This clean-cut version’s overall length is only 62mm, and there are significant reductions in the X/Y dimensions by using the new injection moulded fan duct.

Are you eager to start printing right away? Good. So are we – and that’s why here at MatterHackers we praise the V6 Hotend. No adhesives, Kapton tape, or soldering is needed to get started. The new v6 simply locks into place with a little screw, and high-temp glass sleeving is used to insulate the thermistor legs.

This makes installing the V6 hotend (as well as removing) a quick and smooth process compared to earlier methods involving various adhesives. The parts of the hotend just screw together, and the fan duct naturally clips in – this can be manipulated in different ways to suit your setup preference.

Highest quality precision 10M GT2 Width 6mm Black Open Timing Belt For 3D Printer. Made from NEOPRENE Synthetic Rubber reinforced with fibreglass cords for superior strength. Neoprene an oil-resistant substitute for natural rubber, was invented by DuPont scientists on April 17, 1930.

The Timing Belt also called the synchronous belt is popularly known for its non-slipping mechanical drive belt. It is composed of a flexible belt which contains a row of teeth embedded on the inner surface of the belt. The Timing Pulley and belt work when the toothed parts become compatible with each other.

It is a belt that usually features teeth on the inside surface, while a timing chain is a roller chain. Widely used in mechanical devices, printers/photocopiers, 3D printers, robotics, automation, etc.

• Precision registration and timing with no loss of high torque-carrying capability
• Minimal vibration and chordal effect Positive slip-proof engagement
• Wide speed range, especially important when the entire speed range is developed from a single source
• Virtually no elongation (stretching) due to wear
• Power transmission efficiency is not lost with the use
• A clean operation, no need for lubrication
• Reduced noise.
• Long, dependable trouble-free service.

1 x 10M GT2 Width 6mm Black Open Timing Belt For 3D Printer

Highest quality precision GT2 Timing Belt For 3D Printer. Made from NEOPRENE Synthetic Rubber reinforced with fibreglass cords for superior strength. Neoprene an oil-resistant substitute for natural rubber, was invented by DuPont scientists on April 17, 1930.

• Resists degradation from sun, ozone, and weather.
• Performs well in contact with oils and many chemicals.
• Remains useful over a wide temperature range.
• Displays outstanding physical toughness.
• Resists burning inherently better than exclusively hydrocarbon rubbers.
• Outstanding resistance to damage caused by flexing and twisting.

The GT2 Timing Belt also called the synchronous belt is popularly known for its non-slipping mechanical drive belt. GT2 Timing Belt is composed of a flexible belt which contains a row of teeth embedded on the inner surface of the belt. The Timing Pulley and belt work when the toothed parts become compatible with each other.

It is a GT2 Timing Belt that usually features teeth on the inside surface, while a timing chain is a roller chain. Widely used in mechanical devices, printers/photocopiers, 3d printers, robotics, automation, etc.

10mm 100ft High-Temperature Heat Resistant Polyimide Koptan Tape Hot serves as the perfect combination of heat resistance (anti-creek property) and Durable Insulation. Extensive use as electrical insulation for transformers, motors, coils, capacitors and frequency conversion power supply in the electronic industry.

• This is one-side Self-adhesive.
• This is used for Extensive use as electrical insulation for transformers, motors, coils, capacitors, and frequency conversion power supplies in the electronics industry.

1 x Koptan Tape 10mm 100ft High Temperature Heat Resistant Polyimide Koptan Tape Hot

Easythreed X7 3D Printer is a compact and user-friendly 3D printer suitable for beginners and hobbyists. Easythreed X7 3D Printer features a sturdy and durable construction with a sleek design. The Easythreed X7 3D Printer offers a decent build volume and supports various filament types.

With its simple interface and easy operation, the Easythreed X7 3D Printer allows for hassle-free 3D printing. It is an affordable option for those looking to explore the world of 3D printing and unleash their creativity. Looking to bring your imagination to life? The Easythreed X7 3D Printer is the perfect tool to transform your ideas into tangible objects.

Whether you’re a hobbyist, a student, or a professional designer, this cutting-edge 3D printer will revolutionize the way you create. With its sleek design and user-friendly interface, the Easythreed X7 3D Printer is built for convenience and simplicity. Its compact size makes it ideal for any workspace, whether it’s your home, office, or classroom.

You don’t need to be a tech expert to operate it – just plug it in, load your design, and watch as your ideas materialize before your eyes. Featuring advanced printing technology, the Easythreed X7 offers exceptional precision and detail. Easythreed X7 3D Printer boasts a high printing resolution, ensuring smooth and accurate prints every time. Whether you’re crafting intricate models or functional prototypes, this printer delivers impressive results with ease.

• High printing accuracy, 235 * 235 * 250mm large printing size.
• The extruder temperature is up to 310℃, Compatible with more high-temperature Materials. hotbed can reach 110℃ in about 5 minutes to meet the needs of fast heating and printing.
• With touch screen operation very simple assemble process compared with other similar type 3d printer
• Compatible with various 1.75mm printing filaments like PLA, ABS, TPU, Peek etc; wide applications, can be used for product structure design, toy modelling, architectural design, parts manufacturing, etc.

1 x Easythreed X7 3D Printer Large Size High Temperature Peek Print Nozzle I3 Touch Screen 3D Printer

EasythreeD ET-1000 LCD UV Resin Printer – Build Volume 118 x 66 x 150mm, Print Speed Max 60mm per hour, 2.8" LCD Display with Touch Screen. The Easythreed LCD ET-1000 Resin Printer has detailed colour codes, contrasts, and crisp images that won’t fade away over time. ET-1000 Resin Printer can be used to print, write, edit, and create patterns on multiple surfaces. you can also use it as a desktop printer for your office or home. A high-speed SLA printer can quickly and easily print the printing, which is more convenient to use.

• ET-1000 Resin Printer designed for high-precision and detailed 3D printing.
• High-resolution LCD screen for sharp and accurate printing results.
• Large printing volume to accommodate various sizes and quantities of models.
• ET-1000 Resin Printer supports a wide range of UV resin materials for versatile printing options.
• Fast printing speed for efficient and time-saving production.
• ET-1000 Resin Printer has an easy-to-use touchscreen interface for intuitive control and settings adjustment.
• Compatible with ChiTuBox slicing software for optimized model preparation.
• Suitable for jewellery making, dental applications, miniatures, and other detailed 3D printing projects.

1 x Easythreed ET-1000 Resin Printer ET-1000 LCD UV Resin Printer

This is the Anet A8 Mainboard, V1.5 A8 Motherboard for the Anet A8 3D Printer. The 3D printer main board has 3-way PWM DC output, 1-way high current, 3-way medium current, and 2-way small current.

The 3D printer motherboard supports 12-24V input, and the self-levelling proximity probe motherboard can reduce heat during work. Adopt on-board 4 way A4988 16 subdivision stepper driver board motor for good efficiency and stability.

It can directly connect to Ramps1.4, 2004LCD control board and 12864LCD control board, which is very practical. The 3D printer motherboard comes with a USB interface, the control board is light in weight, and the connection is simple and safe.

Power Input: 12V-24V, with USB interface
Connection: Supports for Ramps1.4, 2004 LCD and 12864 LCD control board

• PWM DC 3-way output: The 3D printer main board has 3-way PWM DC output, 1-way high current, 3-way medium current, and 2-way small current.
• Reduce heat: The 3D printer motherboard supports 12-24V input, and the self-levelling proximity probe motherboard can reduce heat during work.
• Reliable Work: Adopt on board 4-way A4988 16 subdivision stepper driver board motor for good efficiency and stability.
• Perfect Match: Can directly connect to Ramps1.4, 2004LCD control board and 12864LCD control board, very practical.
• USB interface: The 3D printer motherboard comes with a USB interface, the control board is light in weight, and the connection is simple and safe.

1 x Anet A8 Mainboard, V1.5 A8 Motherboard for Anet A8 3D Printer